Finished Or Not Friday: Another Pop-Up Bucket!

 Hello August!  Just here to report a quickie along with everyone at Quilty Girl Alycia's for this week's "Finished Or Not Friday"!

Last year I made one of of the Fat Quarter Gypsy - Sew Organized Design "Stacking Pop-up" buckets to use as a sewing station garbage can when I visit my MIL for a mini quilting retreat.  That one was coordinated to go with the bag and supplies I use if I take my Juki sewing machine with me.  

The outside fabric is actually a recycled sheet!

The Juki travel set-up.

At that time I also had planned to make another one for my Featherweight's travel sewing kit.  As I said on the last post about my "Catch-All Cuties" sewing tools totes,  I like to have a separate set of tools for each of my sewing set-ups.  I purchased fabrics to go with the black, red and white color scheme of all things Featherweight.

I had purchased the red lining fabric for it when I Shop Hopped with my MIL back in October.  I wound up ordering the black and white exterior fabric when I got back home.  That happened because I decided that the fabric I had purchased for that on the Shop Hop would go better with a panel I already had in stash to make a future holiday quilt.

However, before I could get that one made up, I actually made another one!  On the July 4th holiday weekend, my husband and I went on a camping trip to Letchworth State Park.  Since this was a short trip, we used our small camp set-up:

On our last trip with this same kit over the Memorial Day weekend, one thing we realized was that we needed a small garbage can for our tent.  We've tied plastic bags to the little table we use inside the tent but really wanted something a little more structured.   Fortunately, when Joann's had gone out of business this year I had picked up some fabrics because I loved the bright colors of one and the camping theme of both:

At the time, I had thought I might use them to make a new roll up kitchen utensil storage pouch for my DH.  When I saw we needed the can and since I had made one of these Pop-ups before, I decided I'd use some of it for that instead!  For the sewing station cans, I had used a "Large" pop-up, this time around  I made a smaller "Medium" sized one:

And hard at work in our tent!

These Pop-ups also come in an even larger "Extra-Large" size as well as a "Small" and "Mini" size. They are easier to make than they look and full instructions for all the sizes are in the  "Stacking Pop-up" pattern which is sold seperately from the wire frames.

You only have to cut out six pieces to make it:  one side piece out of each fabric used for the outside and inside, interfacing (the same size) for both of those and circles for the bottom out of both the outside and inside fabrics (a template for that is provided with the wire frames).  

If you are going to secure the folded up Pop-up with ties, you cut two additional fabric strips to make those but you can also use a strip of elastic for that.  Note that I used a twill tape printed like a ruler for my first large one and I recycled an elastic headband from a broken headlamp for my camping version.  

With the camping one done, I figured I'd end a busy July finally making up the second Large one for the Featherweight kit.

All finished, open and closed!

This completes my set of DIY travel accessories for my Featherweight!

If you want to make things like this for your Featherweight, check out the making of my tote bag, foot controller drawstring bag and extension bed cover here (all using Jeni Baker's Sew Portable Travel Set design) and the Catch-All Cutie I made for this set here.

Want to know what else everyone is making to start off this new month?  Well then head on over to Quilty Girl Alycia's for some "Finished Or Not Friday" reports!  

Finished or Not Friday: A Big Gift Project Is Finally Done!!

I am thrilled to start May off with a report on a big project completed.  Join me as I and other quilters check in at Quilty Girl Alycia's for this week's "Finished or Not Friday" projects! 

I will admit April closed with a lot going on and I must say that quilting was a haven in a storm of health and home repair issues.  For a couple of years now, I have been trying to finish a big projct:  making gift quilts for three members of my community garden's Steering Committee.  

I have displayed my quilts at the Art Shows our garden has hosted and the Committee members had been as enthusiastic about them as other attendees of the shows.  The last one we held was in 2023 and I had provided a quilt to raffle off at it.  

When the winner of it was one of the four Committee members,  I immediately hatched a plan:  now was the perfect time to make quilts for the other three members!

I actually had a head start on that since I had actually set out to make two quilts for raffling off.  I had used what has become my "go to" and favorite "simple to piece" quilt:  a "9 Fat Quarter Disappearing Nine Patch" quilt that I learned how to make from a You Tube video.  Despite the quickness of the piecing, what I have learned over time in making these is that, at least for me, it takes me a good bit of time to make the fabric choices and decide where to place them within the top.  As part of the "disappearing" technique, some of the fabrics wind up getting flipped or turned from their intial orientation in the starting nine patch layout.  Once pieced back together to create the top, then I sometimes get hung up on how I want to quilt them.  

Edited To Add:  I realize that for the rest of this, it would also be good to join in over at Andree's "Quilting and Learning - What a Combo!" for this week's "Free Motion Mavericks" link up!

In the case of the second raffle quilt, I had decided to stitch it in what I believed would be a simple stipple variation called "Square Meander".  

I've since found demos of it here and it done in borders here.

I have done Stippling before but not this variation of it.  I thought it perfect for the quilt and I was excited to try it.  I got a late start quilting it right before the show but half way through got a little into my head about whether I was doing it "right".  Also since I was quilting it with a last minute deadline, I was also tense about whether I was filling the quilt space fast and evenly enough.  As a result I decided not to continue to stress myself out and abandoned finishing the second quilt in time for the show.  Of course the good news was that when the Committee member won the quilt that I did get finished and I decided to make more,  it meant I already had a half-finished quilt underway!

Well the plan was to finish it and two more for the other Committee members by the end of that year in the hopes of presenting them at the garden's annual Holiday Party.  Yeah right, that didn't happen!  Then time, tides and "squirrel projects" meant I didn't pick back up on finishing the quilting on that second quilt until the start of this year!  

This time I was determined to get all of the remaining quilts done before our season opened at the end of April so I finally got back on the horse!  What also helped with that was seeing someone demonstrating at a virtual quilting workshop the exact same stitch pattern I had done.  Of course it was immedately confirmed that I had been doing it right all along and getting a grip on myself,  I finished quilting it in one day back in January.

Okay one down and two to go!   Later that month, I pieced the next two quilt tops and finished the backings for both of them right before we made our annual winter visit to my MIL's during the week of Valentine's Day.  I swore when I came back I would quilt them up and try to have them done by the end of March, well before the season opening.  

However, at that virtual sumit I had also learned of two ideas that I wanted to employ on one of the quilts.  To start, in the center of the quilt I wanted to stitch a detailed echoed Heart motif with additional "Ribbon Candy" motifs stitched between the echoed areas.  I was hoping to take advantage of a Ribbon Candy workshop by Esther Frenzel of IPatch and Quilt.  I signed up for it in the hopes of learning more about this motif which it turns out is infinitely more versatile than I had ever imagined.  This quilt could then be one of my practice pieces.  

Again, yeah right!!  Given that this was a gift, maybe using this as a practice piece was not the best idea and I remained terrified of "messing it up"!  So instead it took me a couple of weeks to let go of that idea and just go with the other motif I learned at the Summit and had already sketched out so knew I could easily and quickly execute:  a large "Ribbon Stipple".  

Once I defaulted to the simpler all-over pattern,  I quickly stitched up the second quilt in one day rather than the two I thought it would take.

And with that Quilt #3 was done!

For the last quilt,  I had already planned to go a more traditional route with the quilting by doing another familiar all over pattern: "Baptist Fans".  I have stitched this design on four prior quilts using four different methods.  The last time I did it on my MIL's longarm and prior to that was when I made my civil war repro "Piecing the Past" quilt.  That one I ruler quilted with Westalee templates (and you can see a demo of them in action here).  So I had no concerns that this was doable using a free-motion method and could be completed in two or three days.   

The quilting in progress.....

However, in the end, this one took me almost a week to get done!  The reason it went so slow is that I used 80 wt Wonderfil DecoBob thread to quilt it and it took a while to figure out what my Juki machine needed to work well with that thread.  As it turned out, I had purchased something very helpful when I was first introduced to this thread at 2024's Quilt Con show:

These needles made all the difference!  With the HX-5 high-speed machine needles I normally use on the Juki, I was having trouble with frequent thread breakage.  Then I switched to these and it was "swoosh!" and super fast stitching straight through!  I had spent a day each on the first two rows of stitching but after changing the needles was then able to do four rows in about the same amount of time on the third day, another three rows the next day and finished up the last row on the final day of stitching.  I had picked up a whole bunch of these spools during a recent eQuilter sale so needless to say,  I will now have to stock up on these needles for all future sewing with this thread!  Problems solved, I quickly finished trimming up and binding the quilt and now the last quilt was ready to go!

With the last two finished, all three were now ready for gifting which was done last Thursday and as you can see here, everyone was happy with what they received!

I had asked the committee member on the right to bring the raffled quilt that she won two years ago so I could get a picture of them all together.  I was thrilled to have finally had the chance to honor these ladies for founding our garden fourteen years ago and continuing to work very hard to keep it a going concern ever since!

I had pushed to get the quilts finished and gifted before our garden's season opening which was scheduled for the last Saturday in April and would be our garden's "Earth Day" celebration as well.  Although I got the quilts gifted in time, unfortunately we had to postpone the opening day event due to rain.  We had rescheduled it for tomorrow but rain is now forecast for that day too so we will be trying again the Saturday before Mother's Day which as of right now is forecast to be a sunny day.  

Thank you for joining me on the recap of this latest quilt journey.  I hope you are as excited as I am to see what has bloomed out of everyone else's quilt studio for "Finished Or Not Friday" this week over at Alycia's!  Also get some ideas for approaches to finishing your quilts with Andree's "Free Motion Mavericks" at "Quilting and Learning - What a Combo!"

Finished Or Not Friday: Spring Quilts and Gifts

This week I am once again joining in with those reporting their finishes along with our esteemed hostess Alycia for Finished or Not Friday!  

It's always interesting to me how projects get started or evolve.  This quilty finishing tale started back in 2014 when I made "Fabric Gal" to use to decorate my bed for Spring.  

In 2016, we gifted that quilt to my husband's convalescing aunt to brighten her hospital room.  Everyone that visited enjoyed the quilt and when she passed away we gave the quilt to her daughter.  Of course that meant I now needed another Spring quilt.  

In 2017, I purchased a "juicy" bright fabric bundle from the Turning Twenty online store.  Since this was not the usual kind of colorway I worked with, I did not immediately come up with a design to make with it.  In fact, that didn't happen until 2020 while we were stuck in our homes due to the COVID quarantine.  

We quilters were fortunate that so many quilt designers came up with new designs and quilt alongs to keep us busy while under lock down.  That year Gudrun Erla of GE Designs held a free quilt along for her new pattern "Elvira".  I was excited to participate as it also meant using my favorite Stripology ruler.  I added fabric to the bundle I had purchased to fill out the amount of fabric I needed for the project....

....then followed along and made up the top.

However with loads of other quarantine projects afoot, it sat while I debated on how to quilt it up.  

In 2023 and still without a Spring quilt for my bed,  I found in my stash what I thought was a yard of the Peach floral fabric I had used for the borders of the "Fabric Gal" quilt.  By now I was a big fan of the Fabric Cafe "3 Yard Quilts" and saw this as an opportunity to make one.  I purchased some coordinating fabrics to go with what I had and took it with me down to my MIL's in North Carolina for our annual Fall visit and mini Quilt Retreat (she is also a quilter).  

When I started cutting the fabric for the pattern I picked for it -- "Heartland" -- I realized I actually had a little more than two yards of that border fabric.  I decided that rather than make the lap size quilt that the 3 Yard patterns typically make, I could "upsize" it to a twin if I could get more of the coordinates.  I was able to find one while in NC but had to wait until I returned home to NY to get more of the second.  Before long I had doubled the basic design into a twin top!

Finished top and backing purchased on a Shop Hop while in NC.

When I didn't get around to quilting it by the end of that year,  I planned to bring it back down to my MIL's and try to quilt it on her new long arm.  We returned in May of this year for the funeral of another of her sisters.  While there I did load the quilt onto the longarm but for reasons I didn't understand at the time, I couldn't get the pattern I wanted to stitch out.  

While there, I was showing a friend of my MIL a picture of the "Elvira" top that "Heartland" was now replacing.  She really liked the bright colors of it and since she was in the process of finalizing a move to retire to my MIL's town, I decided that I would bring it back down when we returned to visit in the Fall and quilt it up as a surprise housewarming gift for her.  

In the meantime, after returning back home with the unquilted "Heartland" top, I lucked up on receiving information about a "Free Motion Quilting Summit" being held in August.  Adria Goode who was one of the presenters showed her "Big Flower" stitch pattern and I just knew it would work for "Heartland".  With many other projects on my plate, I didn't start quilting it until late September, getting it about half way done.  

I had to break from working on it because we were now scheduled to return to my MIL's in early October.  While there I finally got the "Elvira" quilting going.  I pieced together a backing that included a strip of scraps leftover from piecing the top and included a label.  I then picked out a large continuous line flower stitch pattern to use to quilt it.

I went with the simpler Blossom E2E pattern.

Luckily with a lot of new lessons learned on this trip about working with the longarm,  I was able to get it all stitched out!

And before you know it the quilt was finished!

Two days before we left I trimmed and bound it and it was ready for gifting along with another little gift that can be seen in this post!

On our return home it was now time to also get the "Heartland" quilt finished.  I worked on that this week and now it too is finished!  

As a throw back to the "Fabric Gal" quilt, I still had some of the panel fabric I used for the label of that quilt so made a similar label for the new "Heartland" one! 

Previous and New Labels!

I look forward to when I can use this one in the Spring!

I also look forward to checking out what everyone else has made up this week over at Alycia's for Finished or Not Friday!  There's always good stuff to see so be sure to check it out yourself!

Quilt Stitching Inspiration Finally Leads To A Finished Quilt

Whew, it's been a while since I've checked in!  It's been a busy summer and I will be posting recaps of all that has been going on quilt-wise.  However in recent weeks I have also been trying to focus on getting some finishes done.  So for starers, I'll debut the first one this week over at Alycia's Finished Or Not Friday !

In July a lot of my piecing focus went towards "Christmas in July" projects.  However, my original plan for that month was to do a lot of quilt stitching!  The impetus for that was the latest Free Motion Quilt Challenge announced by Angela Walters at the end of May and scheduled to run in July.  Titled "How Do I Quilt It",  she planned to discuss stitching patterns that could be used to fill Chevron, Snowball, Log Cabin and Curved blocks and Applique borders.  

That was just the push I needed to start a project I had long wanted to do:  "Apple Crisp" is a design I thought I first saw in an American Patchwork and Quilting "Fall Quilts" compilation (scroll down to #20 for the link to the free pattern).  Later I discovered I had the October 2010 back issue it was originally published in. 

The magazine version and my finished top!

After learning about the challenge, I spent the latter half of June working on the blocks.  I changed the size of all the blocks so I could use my Accuquilt Snowball block die to cut those particular blocks.  In order to get all the blocks done by the time of the challenge,  I even pieced some while we were away camping in Shenandoah National Park!

I finished the top in early July just in time for the part of the Challenge for the Snowball blocks.  However, for the first time watching one of Angela's challenges, I did not immediately get ideas for stitching my own project!  The issue for me was that most of  the stitch designs she showed called for detail stitching in the centers of the blocks.  I was stopped in my tracks by one of the fabric choices I had made during the piecing:

Also didn't realize until this point that I should have pieced those chain blocks differently to line up with the Snowball corners!

I didn't really want to stitch over this guy.  The designs she demo'd were great but wouldn't work for this one block and I wanted to stitch all the blocks the same.  So this time it took looking beyond what she was stitching in the blocks to find inspiration from what she used to fill other spaces around them.  It took me most of August to figure that out as I continued to work on other projects.  Eventually I combined that inspiration with some of my own ideas which led to what I used to finish this one up.

At this point, I'll also join in over at Denise's  "Put Your Foot Down" to share the stitching part of this finish....

and over at Andrée's Quilting & Learning - What A Combo!

The stitch plan started with deciding to just straight stitch through the chain blocks which would also help stabilize the center of the top.  At some point in Angela's demo I saw her do stitch patterns in the Snowball corners -- okay, I can do that.  However, I was still stumped for what to stitch in the block centers.  

I often go very literal when I work on quilt projects.  Since the name of this quilt is "Apple Crisp" why not do an "Apple Core" stitch motif?  But will I need to mark it?  Well, it just so happens that I had this in my template stash:  

This is actually a piecing template that I've had for years.  I've always wanted to make an Apple Core quilt but never got around to it.  I even considered getting the Accuquilt die for making one.  I held off on that because I felt I should at least try using this template before I spend money on another one.  I also don't really know if I'd ever make more than one of these types of quilts anyway.  

Now that I had my stitch plan, I finally layered the quilt sandwich earlier this month.  Luckily for me, it turns out that using the piecing template worked just as well as a quilting ruler since I have a non-hopping ruler foot!  I even used the template in the borders and tessellated the motif like it would be when pieced.  

It's not as even in the borders as it would be pieced since I just used the edge of the template to stitch along instead of lining it up along the seam allowance slots.   

After employing those two stitching motifs,  I felt that I needed to also stitch something in the sides of the Triple Four Patch blocks.  For that I had another ruler -- this time one that is actually for free-motion quilting and that I hadn't used up until now:

I had purchased this Handi Quilter ruler a few years after quilting "Flying For Cover" with free hand clamshells.  For that quilt, I had marked the spacing of the clamshells using Inchie Tape.   However, after quilting it, I realized that while I liked the stitch design, I wanted a way to insure that I could quilt various size arcs as evenly as possible.  This ruler is 1/4" high so is actually for use on a longarm but I had no problems using it from all sides on my high shank Juki machine.  

Doing this many different stitch patterns -- even simple ones --  is essentially considered custom quilting.  So needless to say, it all took far longer than I had expected to spend quilting this project.  

Photographed under the Crabapple tree in our community garden!

Now that it's done, I am happy to say that this is a pretty addition to my Fall decorating.

Linking up with:

Alycia's Finished or Not Friday

Denise's Put Your Foot Down

Andrée's Quilting & Learning - What A Combo

February Recap: Part 5 - A Little Finished Or Not Friday Reporting

Happy March to all who are participating in this week's "Finished Or Not Friday" session hosted by the lovely and gracious Alycia of Quilty Girl (and Quilts of Valor)! 

I have two contributions for this last report on the things I worked on in February:  one is "Not Finished" and the other is a very important "Finish" for me!  

Almost A Flimsie

In my last post I talked about attending the big Quilt Con show during a visit to my MIL in North Carolina.  Once that weekend of modern quilts and excitement was over, it was time for my MIL and I to get back to our mini quilt retreat and working on some of our own projects.  

In that post about the show, I talked about using scrap strings to make a cover for the little notebook I used to take lecture notes.  The reason I had those strings along with me on the trip was because I brought this project with me to work on.

It is Abigail Dolinger's "Scrap Vortex" design that originally appeared in McCall's Quick Quilts June/July 2019 but can also be purchased as an individual pattern.   I've long liked this design and was encouraged to finally start it in order to try to participate in Emily Bailey's (of Aunt Em's Quilts) strip quilt challenge that had an early March deadline.  

I had gathered fabrics for the dark corner squares and the first two solid fabric borders but had problems finding a fabric for the third border.  Actually, I found one I really liked in my stash but of course it wasn't enough for what I needed and I couldn't find more of it.  So I was hoping to find an alternative at the show.  Luckily I did!  

The medium gray calico was the fabric I had originally hoped to use for the third fabric border but found the replacement fabric below it in the GE Designs vendor booth at the show.  I then hoped to finish the top before we left NC but only got this far with it by that time.  

Still hoping to make the challenge deadline, I continued work on it once we got back home.  Unfortunately I didn't get it done in time and I still have three sides of the last string border to add at this point.  

And of course, as often happens with scrap projects, it feels like I've still barely made a dent in the string stash!!

A Long Awaited Mystery Finish!

As I had talked about in this recap post, the big task for our little quilting retreat was to try to learn to use the computerized Pro Stitcher Lite software on the Handi Quilter Moxie long arm my MIL had purchased during the shop hop we did on our last visit back in the Fall.  You know how they say two heads are better than one?  Well it must be true because we got some done!  We stitched two of hers...

....and I got one of mine done!  

Long arming done and edges trimmed

This is a big thrill since this top, aptly named for the mystery as "An Oldie But A Goodie" is just that!  I made the top all the way back in 2014 for the last mystery hosted by the Planet Patchwork website before they shut down.  It has been sitting all this time and now it is a lovely and bound finish!!

All that's left of the pretty binding fabric.

I did learn some lessons about long arming through this process.  Loading a quilt on a frame is less time consuming than pin basting but you really do need all that excess batting and backing around the edges of the top both to help with tensioning and to provide space to test your stitch tensions and patterns.  

Setting up your desired pattern to stitch out on your top how and where you want it and learning the mechanics of advancing the quilt, basting it for each advancement and resuming a design if the stitching is interrupted or you need to change bobbins, all take practice to master.  

Bonus lesson from the Quilt Con Show:  We had checked out the Wonderfil Threads booth, particularly their DecoBob 80 and Invisifil 100 Weight threads.  Oh boy, those threads are a wonderful alternative to using monofilament thread on multi-colored tops!  

After seeing the quilted samples in the booth, I purchased two spools of 100 wt. in Beige and light Gray and a spool of the 80 wt in a medium Gray planning to try them out on the "Over/Under" quilt I had struggled with quilting using monofilament last year.   

However, I wound up using the Beige 100 wt. for this quilt and thought it stitched out beautifully over all the many colors of fabrics I used in this top.  My MIL had purchased pre-wound bobbins in the 80 wt. which they carry for all different classes of long arm machines and that was used for this quilt too.  

I used about 1-1/4 bobbins to stitch out the Baptist Fan pattern on this 47" x 60" quilt.  I definitely look forward to stocking up on more of it!  Fortunately, they gave us a list of dealers that sell it in NC and at least one of the shops usually participates in the "All Carolinas Shop Hop" in the Fall which is when we'll be returning for our next visit.  I will definitely have a wish list with me then!  

So that wraps up my doings for February and I am thrilled that it coincided with the first FONF report for March.  Now I can head back over to Alycia's to see what everyone else has going on as the Spring rains come in and prepare the way for the flowers we will see before long!